Chapter 3
Administration
Administration of the Xgig1000 System over the Internet
Page 102
Xgig1000 Hardware Guide
March 2017
Administration of the Xgig1000 System over the Internet
Xgig Web Utility
You can perform administration and configuration activities over the Internet using the Xgig
Web Utility. The Xgig Web Utility performs the following functions:
•
Configure
–
set chassis IP addresses and select/remove DHCP addressing
–
set the system IP address/account name/password for the FTP server used to
upgrade application and system images
–
change the TCP port number for the chassis. We recommend 52000.
–
synchronize the Xgig1000 system clock to the time on your local system
–
assign or change licensing for a blade within the chassis
•
Get chassis status
–
blade information, including location and firmware revision level
–
chassis system information, including current system image version
–
application image information, including revision levels of all application software
at the Xgig1000 chassis
•
Perform upgrades
–
system image
–
application image
–
upgrade status, check for available upgrade versions
•
Perform chassis administration
–
system reboot
–
system shutdown
–
sync reset
•
Change the web access login user name and password
•
Enable user authentication and set the password for remote users
•
Set management port speed (pre-set to auto-detect the speed)
NOTE
The Xgig1000 comes with a web-based system administration utility that performs
upgrades and other configuration activities over the Internet.
