Seeker X User’s Guide
22137808, Rev. 001
Feb 2020
45
Chapter
2 Using Your Seeker X
Distance correction adjustment
While testing for leaks, you may want to adjust the distance correction value to account for
differences in distance between the Seeker X and the cable plant.
NOTE:
This feature is disabled by default at the factory. In the
Seeker Setup software, the Enable Distance Correction
checkbox must be selected and at least one distance has
been configured and enabled before this feature will work.
NOTE:
The display will revert to the signal level display after a
few seconds in the distance correction display (without any
action by the user).
Use the
DISTANCE
button to
display the Distance Correction
mode.
Summary of Contents for Seeker X
