28
© 2020 Viavi Solutions Inc.
Adding or Deleting channels from the sweep plan
•
If modifications to the channel plan are
desired existing channels can be deleted
from the “Sweep Points List” table
•
Individual channels can be added manually
to the sweep plan in the “Define Active
Carriers in system which will be used as
sweep points” section
•
Manual entry of the channel type, center
frequency, channel bandwidth, and Level
are required
•
Press the “Add Channel” to add the
configured channel to the “Sweep Points
List”
Level is the power level of the channel at the RF Combiner and is used by the
field unit to estimate point to point attenuation during unreferenced sweep tests
