Chapter 7
mA-6806 Care and Maintenance
Operator Level Maintenance
Final
mA-6806 AXIe Vector Signal Transceiver Operation Manual
Page 80
July 2019
Operator Level Maintenance
The following procedures may be performed by the Operator. All other service must be
performed by Qualified Service Personnel.
Visual Inspections
Visual inspections should be performed periodically depending on operating environment,
maintenance and use.
•
Inspect connectors for dirt, dust, corrosion or rust.
•
Check the presence and condition of all warning labels and markings and supplied
safety information.
External Cleaning
The following procedure contains routine instructions for cleaning the exterior of the
Device.
•
Remove grease, fungus and ground-in dirt from surfaces with soft lint-free cloth
dampened (not soaked) with isopropyl alcohol.
•
Remove dust and dirt from connectors with soft-bristled brush.
•
When not in use, cover the connectors with suitable dust cover to prevent tarnishing
of connector contacts.
CAUTION
This Device does not contain user serviceable parts. Servicing should only be performed
by Qualified Service Personnel.
Mise en Garde
Cet appareil ne contient pas de pièces pouvant être entretenues par l’utilisateur.
L’entretien doit seulement être effectué par du personnel de service qualifié.
