Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download Page 143

Page: 143 / 380

GS-8P-96T

Chapter 1: Appliance installation 143

18.

(Optional) Change the

LOM port (page 176)

in the BIOS using a static IP

address provided by your network administrator.

19.

Double-click the Observer icon on the Desktop to start Observer.

Your hardware appliance is installed and on your network.
Next, give the

10/100/1000

IP address and LOM port address, if using, to the

Observer administrator. They need the addresses to add this GigaStor probe to

Observer to capture network traffic with a probe instance.

GS-8P-96T

The GS-8P-96T is best suited for 1 Gb & 10 Gb hybrid data centers.

GS-8P-96T technical specifications (page 143)

GS-8P-96T technical specifications

The technical specifications for the product are shown below.

Figure 71: GS-8P-96T Front

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Brands by name

Popular brands