Viavi 8380 RPC User Manual Download Page 30

Page: 30 / 54

8380 RPC User’s Guide

Document Num., Rev. 3

May 2018

Page 30

Connecting & Disconnecting the 8380 RPC

Before any changes can be made to the setup of the 8380 RPC, the 8380 RPC Setup software

must connect via USB with the 8380 RPC. Perform the following steps to connect the 8380

RPC to the PC running the 8380 RPC Setup software:

1. When the Status LED on the front panel of the 8380 RPC

is illuminated, connect the included USB cable to the 8380

RPC and then to the PC that is running the 8380 RPC

Setup software.

2. Wait for the Status LED to illuminate.
3. Select the “Return Path Combiner Setup” link from the PC

desktop or

Start

menu.

4. From the

Connection Settings

section of the 8380 RPC

Setup software, select

8380 RPC Master

from the

Target

Device

dropdown list.

5. Select either

Auto

or the specific

COM

port address from

the

USB/COM Port

dropdown list.

6. To connect to the 8380 RPC, select

Connect

7. When the PC and 8380 RPC have established a USB

connection, the information shown in the

System

Information

table will populate with the current system

information if connected to a master unit.

8. To disconnect from the 8380 RPC, select

Disconnect

System Setting Tab

Summary of Contents for 8380 RPC























































Search results

Summary of Contents for 8380 RPC

Reviews:

Related manuals for 8380 RPC

Brands by name

Popular brands

Viavi 8380 RPC, User Manual

Search results

Summary of Contents for 8380 RPC

Reviews:

Related manuals for 8380 RPC

Brands by name

Popular brands