8380 RPC User’s Guide
Document Num., Rev. 3
May 2018
Page 21
Computer System Requirements
In order to install the 8380 RPC Setup software, the following computer hardware and software
conditions must be met:
• Windows XP or newer operating system
• A screen resolution of at least 800 x 600 pixels
• 500 MHz processor with 512 MB of RAM and 100 MB of free hard drive space
In addition, a USB Cable (Type B to Type A) is required in order to establish communications
between the 8380 RPC Setup software and the 8380 RPC.
Software Installation
Perform the following steps to install the 8380 RPC Setup software from the included CD:
1. Depending on which operating system you are using, logging in as the system
administrator may be necessary.
2. Insert the 8380 RPC Setup software CD into the appropriate drive.
3. If Autorun is enabled for the CD-ROM drive, the 8380 RPC Setup software setup
program will start
automatically. If the setup program does not start, select the Windows
Start button, then select
Run
and type
[drive]:\setup.exe
, then select OK (substitute
the appropriate drive letter in the command line, in place of
[drive]
).
4. Depending on which operating system you are using, the “Open File - Security Warning”
dialog box may appear. If this dialog box appears, select
Run
.
Setup
Chapter 3
Summary of Contents for 8380 RPC
