58
AA-800 / AA-800T rev.03
1. Press the
Bypass / Activate
key.
ZONE . . . . . . . . . (1)
PARTITION . . . . . (2)
2. Type
1
to change the status of a zone;
ENTER ZONE
(1 .. 8): _
To change the status of a zone:
3. Type the number of the zone and press
Enter
. If the zone is not properly config-
ured, the system responds with the message:
INCOMPLETE DATA
.
4. Type 1 to activate, or 2 to bypass the zone. The new state of the zone is dis-
played. If you have just activated a zone, the LED associated with the zone will turn
on.
To change the status of a partition:
1. Press the
Bypass / Activate
key.
ZONE . . . . . . . . . (1)
PARTITION . . . . . (2)
2. Type
2
to change the status of a partition.
ENTER PARTITION
(1 .. 8): _
3. Type the number of the partition and press
Enter
. If the partition does not exist,
the system responds with the message:
PARTITION NONE
.
ACTIVATE. . . . . . (1)
BYPASS . . . . . . . (2)
ENABLE. . . . . . . . (1)
DISABLE . . . . . . . (2)
