34
AA-800 / AA-800T rev.03
4. Type the phone number. Up to 20 digits can be entered. If you press the Enter
key without entering any digits, the current phone number is erased from memory and
the message PHONE NUMBER DELETED is displayed. Special characters are available
for use with tone dialing: use the
Asterisk (*)
or
Pound (#)
Trouble
keys to enter
these characters in a phone number. Each one of these characters counts as one
digit in the number. Press the
Pause
key to enter a pause in the dialing. This is
useful when an access code is needed to reach an outside telephone line. For ex-
ample, if you dial “9” to access the telephone lines and wait 4 seconds before dialing
SELECT PHONE
NUMBER (1 .. 8): _
3. Type the number of the phone number to modify and press
Enter
. The current
value for this phone number is displayed.
ENTER PHONE #n
2. Press
Enter
to modify.
3.3 PHONE NUMBERS
Definition:
Phone numbers are used to report alarm conditions. Various methods are
available: voice messages, paging, beeper calls and reporting to a central monitoring
facility. Each number can contain up to 20 digits. A maximum of 8 phone numbers
can be stored by the system. The order of the numbers stored in memory defines the
dialout sequence used when an alarm is validated, i.e. the first number stored is the
first number called in an alarm.
Setting:
1. Press the
Phone numbers
key
Phone
numbers
. The numbers currently stored in memory are
displayed along with their parameter definitions. To stop the display and enter pro-
gramming mode, press the
Cancel
key
.
TO MODIFY. . . . . (
↵
↵↵
↵↵
)
TO QUIT. . . . . . . (X)
