2.5
Oximeter
About Oximeter
The Checkme Health Monitor measures the amount of oxygen in your blood, your
pulse rate and pulse index. The oxygen saturation (SpO
2
) is measured and displayed as a
percentage of full capacity.
Measuring without Cable
To start a Oximeter measurement without cable,
1.
In the Main Screen, tap the
<Pulse Oximeter>
icon.
2.
Insert the forefinger into the built-in SpO
2
sensor as shown below.
Relax your forefinger and do exert pressure.
3.
When the device detects stable waveform, it will automatically start the
measurement. The countdown bar moves from left to right.
4.
When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
Measuring with Cable
1.
Connect the external SpO
2
sensor to the multi-functional connector.
2.
Put your index finger or middle finger into the external SpO
2
sensor. Make sure
the cable is positioned along the top of the hand, and the finger nail is in the
position as shown below.
Finger nail position
12
