9
REPLACING REMOTE BATTERIES
Remove battery cover and replace old
battery with a new CR2032 battery
according the polarity indicated on the
backside of the battery cover (fig. 9).
MAINTENANCE
FIG. 9
WARNING: Before cleaning or storing treadmill, power off and unplug.
CLEANING
• Remove dust with a microfiber cloth.
• Remove dust, dirt, and other debris from exposed sides of the running
belt to prevent dirt from accumulating under belt.
• Scrub surface of running belt with damp cloth and soapy water. Do
NOT get water in or near electrical components.
STORAGE
• To fold handlebar for storage, remove safety lock and remote from
handlebar. Hold handlebar and step on handlebar release. Gently lower
handlebar until locked into place.
• Lift treadmill from back, DO NOT lift from handlebars. Use wheels on
front to roll to desired location. Store treadmill flat or upright against
a stable surface, such as a wall. Ensure it is secure before leaving
unattended. Do not allow children near upright treadmill as it may fall
or cause harm.
CLEANING & STORAGE
ERROR CODES
If an error code appears on the display (ie. ER 1, ER 3, etc.), review
following procedure:
• Ensure you are using the included adapter.
• Ensure outlet is rated for 110-120V.
• Ensure no moving parts are stuck. If stuck, carefully release the parts or
remove any blockages.
• Ensure there is sufficient lubrication between running belt and board.
If not, see ‘LUBRICATION’ section.
If error codes persist, call Customer Service (see Warranty section).
