7
1. Remove protective plastic from
remote and treadmill display.
2. Place treadmill in an appropriate
location based on the precautions
outlined in Warnings section.
3. Erect handlebar by stepping on
handlebar release underneath
folded handle bar (fig. 1). While
handlebar is released, lift handlebar
into the upright position until clicks
into place. It is not advised to use
unit without erecting handlebars.
4. Plug power cord into treadmill
at front next to red power switch
(fig. 2). Plug other end of power
cord into grounded outlet. Turn on
power switch. A sound will chime
and treadmill display will light up
and dash marks will appear on the
display.
5. Remove battery activation strip on
backside of remote (fig. 3).
6. Place safety clip onto handlebar
(fig. 4). Attach safety clip to clothing
when using treadmill. If treadmill
needs to be turned off immediately,
remove safety clip from handlebar
and treadmill will automatically
stop. To resume after removing
safety clip, place clip back on
handlebar and press power button
on display or remote. The treadmill
will not run if safety clip is not on
handlebar and only dash marks will
appear on the display.
7. Stand on foot rails and turn treadmill on by pressing power button
on display or remote. Display will count down and running belt will
begin to move.
8. Adjust running belt speed by pressing speed up or speed down
buttons on remote or display.
USE INSTRUCTIONS
FIG. 1
FIG. 2
FIG. 3
FIG. 4
