ViaSat VBM-1400, Installation And User Manual

Page: 8 / 81

REGULATORY COMPLIANCE and NOTICES
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, of the
FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Any changes or modifications not expressly approved in writing by the manufacturer could void the user’s authority to
operate the equipment.
CAUTION: Shielded I/O cables must be used and all covers must be in place when operating this equipment.
Canadian Department of Communications compliance statement:
This equipment does not exceed Class A limits per radio noise emissions for digital apparatus set out in the Radio
Interference Regulation of the Canadian Department of Communications. Operation in a residential area may cause
unacceptable interference to radio and TV reception requiring the owner or operator to take whatever steps are necessary to
correct the interference.
Avis de conformite aux normes du ministere des Communications du Canada:
Cet equipment ne dépasse pas les limites de Class A d’émission de bruits radioélectriques pour les appareils numériques
tels que prescrites par le Règlement sur le brouillage radioélectrique etabli par le ministére de Communications du Canada.
L’exploitation faite en milieu résidentiel peut entrainer le brouillage des réceptions radio et télé, ce qui obligerait le
propriétaire ou l’operateur à prendre les dispositions nécessaires pour en éliminer les causes.
Electro-Magnetic Emissions Compliance
The equipment has been tested and is in compliance with the following emissions and immunity requirements:
Emissions:
FCC 15B, Sec. 107, Class “A ”
Conducted Emissions
FCC 15B, Sec. 109, Class “A” Radiated Emissions
EN 55022 (1998)A1, Class “A” Conducted Emissions
EN 55022 (1998)A1, Class “A” Telecom Conducted Emissions
EN 55022 (1998)A1, Class “A” Radiated Emissions
EN 61000-3-2 (2000) Power Line Harmonics
EN 61000-3-3 (1995) Power Line Flicker
Immunity:
IEC 61000-4-2 (1995),A1(1998),A2(2000) ESD Immunity
IEC 61000-4-3 (2002),A1(2002)
Radio Frequency Immunity
IEC 61000-4-4 (1995)A1(2000),A2(2001) Electrical Fast Transient Immunity
IEC 61000-4-5 (1995),A1(2001)
Surge Immunity
IEC 61000-4-6 (1996)A1(2000) RF Common Mode Immunity
IEC 61000-4-8 (1993)A1(2000) Power Frequency Magnetic Field
IEC 61000-4-11(2001) Voltage Dips and Short Interruptions
Safety Compliance
The equipment has been tested and is in compliance with the following safety requirements:
IEC
60950-1 (ed.1) IECEE CB Scheme