SurfBeam Satellite Modem Installation and Configuration Guide
Rev. B
VSD-200292-02-085
iii
Safety Precautions
If safety precautions or important information is presented in this
manual, the information will normally be presented just before the
point where the hazard is likely to be encountered. Symbols used to
identify the information are defined as follows:
Warning
This symbol indicates a procedure or practice that, if not correctly
followed, could result in injury, death, or long term health hazard.
Caution
This symbol indicates a procedure or practice s that, if not correctly
followed, could result in equipment damage or destruction.
This symbol indicates that electrostatic discharge (ESD) precautions
must be observed or the equipment may be damaged.
Note
This symbol indicates information that is important to observe.
General safety precautions are as follows:
Warning RF
Radiation Hazard
.
The
transmitting equipment is
capable of generating RF
levels above the maximum
permissible uncontrolled
exposure level. Do not
enter the radiation beam
pattern of the transmitter
feed horn and / or antenna
when the transmitter is on
.
Warning
There are no
user-serviceable parts inside
any of the equipment in your
system. There are potentially
lethal voltages inside the
equipment. It should only be
opened by a technician trained
and certified to service ViaSat
®
products.
Warning
When
the SM is powered
on, DC voltage is
present on the rear
panel TX and RX
connectors.
Summary of Contents for SurfBeam
Page 2: ......
