SurfBeam Satellite Modem Installation and Configuration Guide
VSD-200292-02-085
Rev. A
2-2
4. Power on the Support PC, and wait for it to complete the boot cycle.
5. Refer to the Support PC’s Operating System documentation, and
configure the Support PC for a static IP address of 192.168.1.2.
6. Plug the in-line power supply to the power source to turn on the
Satellite Modem. The power indicator on the front of the modem
will light.
7. Wait for the LAN indicator on the SM front panel to light indicating
the Ethernet link between the SM and the Support PC is OK.
8. On the Support PC, open a Command Prompt Window. Connect to
the Satelli te Modem by typing
telnet 192.168.1.1
. This will
connect you to the SM using its fixed IP address (192.168.1.1) as
shown in the example below.
9. When the SM Telnet Server Welcome screen appears, enter
user
as
the password as shown in the example below.
Summary of Contents for SurfBeam
Page 2: ......
