background image

IMPORTANT SAFETY INSTRUCTIONS

CAUTION -

To reduce risk of electrical shock 

         or electrocution:

Do  not  disassemble.    Do  not  attempt  repairs  or 
modifications.    Refer  to  qualified  service  agencies  for 
all service and repairs.

Do not use this product in or area where it can fall or be 
pulled into water or other liquids.

Do not reach for this product if it has fallen into liquid.  

Use this compressor with 12-volt DC systems only.

This  product  should  never  be  left  unattended  during 
use.

WARNING -

To prevent injury:

Never allow children to operate this compressor.  Close 
supervision  is  necessary  when  this  compressor  is 
being used near children.

This  compressor  will  become  very  HOT  during  and 
immediately  after  use.    Do  not  touch  any  part  of  this 
compressor  with  bare  hands,  other  than  the  ON/OFF
switch during and immediately after use. 

Do  not  use  this  product  near  flames  or  explosive 
materials or where aerosol products are being used.

Do  not  operate  this  product  where  oxygen  is  being 
administered. 

Do not pump anything other than atmospheric air.

Never use this product while sleepy or drowsy.

Do  not  use  any  tools  or  attachments  without  first 
determining  maximum  air  pressure  for  that  tool  or 
attachment.

Never point any air nozzle or air sprayer toward another 
person or any part of the body.

This  air  compressor  is  equipped  with  an  Automatic 
Reset Thermal Protector, and can automatically restart 
after  the  thermal  protector  resets.    Always  cut  off 
power  source  when  thermal  protector  becomes 
activated.  

Wear  safety  glasses  or  goggles  when  operating  this 
product.

Use only in well ventilated areas.

SAVE THESE INSTRUCTIONS

Summary of Contents for 40043- 400P










Reviews: