Chapter 3
Onboard Parallel
Port
Use this item to enable or disable the onboard
parallel port LPT1, and to assign a port address
Parallel Port Mode
Use this item to determine the parallel port
mode. You can select Normal, ECP (Extended
Capabilities Port), EPP (Enhanced Parallel
Port), or Bi-Dir.
EPP Version
Use this item to define the EPP version if the
parallel port is EPP mode.
Parallel Port IRQ
Use this item to assign an IRQ to the parallel
port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port.
Onboard IDE
Use this item to enable or disable either of the
two onboard IDE channels, Primary or
Secondary.
Hardware Monitor & CPU PnP Setup Page
This page lets you set the parameters for hardware monitoring and
manually or automatically configure the mainboard for the CPU.
AMIBIOS SETUP – H/W Monitor CPU PnP SETUP
©1998 American Megatrends, Inc. All Rights Reserved
CPU Speed (MHz) 300(100x3)
CPU/SDRAM Freq. 100/66
CPU Temperature 125°C/257°F
System Temperature 125°C/257°F
CPU Fan Speed
Chassis Fan Speed
Vcc 5.000 V
Vcc3 3.300 V
Vcore 2.000 V
+12V 12.000 V
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
CPU Speed
Use this item to set the internal clock speed of
your CPU.
34
