Chapter 2
WOL1. This allows incoming traffic to resume the system from a
software power down. You need to enable this feature in the
system setup utility.
Wake On Modem (WOM)
If you have installed a fax/modem card, connect the fax/modem to
the Wake On Modem header WOM1. You can then use the setup
utility to program your computer to resume from a power saving
mode whenever there is an incoming call to the fax/modem.
SB-Link
If you have disabled the built-in sound system and installed a PCI
Sound Blaster audio card, you can connect the card to the
SIDEBAND1 header on the mainboard. The SB-Link circuit solves
some problems that can occur when you try to play some older
computer games which run in the DOS real-mode environment.
22
