Page 55 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
6.5 Menu information and Time
The menu
Information and time,
which is reached by inserting
6
in the main menu
,
is headed
by general information to the viasis soft- and hardware:
Information:
Viasis 3003 version 4.16 , H4
Serial number: 15SC9991
Active parameter set: 1
Comments: Via traffic controlling GmbH, Maybachstr. 39, 51381 Leverkusen
Interface options: Bluetooth, USB, GSM/Email, GPS
1. Protocol
2. Comments
3. Date: 04.09.2012, Tuesday
4. Time: 13:57:46
5. Daylight saving time: off
6. Back
Your choice 1...6?
The first line
Viasis 300M3 Version 4.16, H4
includes viasis type designation, software ver-
sion number and hardware release. The second line displays the unique serial number of the
viasis device. Serial number, software and hardware release should be always at your hands in
case you contact our technical support.
Active parameter set
shows the number of the active parameter set of the measurement and
display operation, at the time the menu is called. If at this time no parameter set is valid the
number 0 (null) is given.
The item comments shows typically information like measurement location or other given user
information, see also chapter 6.5.2. The comment line is missing if not set.
In case that radio modem interfaces like Bluetooth, GSM/Email or other optional serial inter-
faces as USB are installed and detected during the power on initialization of the viasis they are
listed in the last line of the information header.
6.5.1 Protocol
The viasis system includes a ring buffer for a protocol of event and error messages. If the ring
buffer is full the new messages overwrite the oldest messages. An explicit deletion of old mes-
sages is for a proper function of the protocol therefore not necessary.
If the protocol is selected by the entry
1
in the menu
Information and time
the number of
stored messages is displayed and you are prompted, whether the protocol shall be send or not:
Number of log entries = 25
Send data (y/n)?
If you insert „y“ for yes, the list of protocol messages is send (example):
Power on; 31.01.12;12:54:50
Error Xmodem packet type; 30.01.12;17:49:10
