VB7007 User Manual
VB7007 User Manual
VB7007 User Manual
VB7007 User Manual
19
19
19
19
Case Connector: F_PANEL
The F_PANEL pin header allows you to connect the power switch, reset switch,
power LED, sleep LED, HDD LED and the case speaker.
Power LED (PLED)
Power LED (PLED)
Power LED (PLED)
Power LED (PLED)
The LED will light when the system is on. If the system is in S1 (POS - Power On
Suspend) or S3 (STR - Suspend To RAM) state, the LED will blink.
HDD LED (HD_LED)
HDD LED (HD_LED)
HDD LED (HD_LED)
HDD LED (HD_LED)
HDD LED shows the activity of a hard disk drive. Avoid turning the power off
when the HDD LED is still on. Connect the HDD LED from the system case to this
pin.
Power Switch (PW_BN)
Power Switch (PW_BN)
Power Switch (PW_BN)
Power Switch (PW_BN)
Connect to a 2-pin power button switch. Pressing this button will turn the system
power on or off.
Speaker (SPEAK)
Speaker (SPEAK)
Speaker (SPEAK)
Speaker (SPEAK)
This pin header is for connecting to the system buzzer.
Reset Switch (RST_SW)
Reset Switch (RST_SW)
Reset Switch (RST_SW)
Reset Switch (RST_SW)
The reset switch is used to reboot the system rather than turning the power
ON/OFF. Avoid rebooting the system, if the HDD is still working. Connect the
reset switch from the system case to this pin.
Sleep LED (SLEEP_LED)
Sleep LED (SLEEP_LED)
Sleep LED (SLEEP_LED)
Sleep LED (SLEEP_LED)
The SLEEP LED is lit when the system is in the S1 (POW-Power On Suspend)
Pin
Pin
Pin
Pin
Signal
Signal
Signal
Signal
Pin
Pin
Pin
Pin
Signal
Signal
Signal
Signal
1
+5VDUAL
2
+5V
3
+5VDUAL
4
HD_LED
5
-PLED_2
6
PW_BN
7
+5V
8
GND
9
NC
10
RST_SW
11
NC
12
GND
13
SPEAK
14
+5V
15
KEY
16
-SLEEP_LED
