12
VIA Mobile360 M800 EVK Quick Start Guide
7. Start the vehicle to power on the VIA Mobile360 M800 system. After the system finishes booting there will be a short beep followed by the notification “Scan
registration QR code.” After the audio notification, there is a 60-second window to scan the QR code from the app.
8. In the app, tap on the vehicle in the list to generate a QR code that is used to bind the system.
9. Place the QR code in front of the driver camera lens of the VIA Mobile360 M800 system.
10. Once the system has scanned the QR code the system will play the audio confirmation, “Registration successful”.
11. Tap on “OK” on the pop-up notification to return to the vehicle list where it will show “Registered” beside the vehicle name.
Notes:
The VIA Mobile360 ADAS Display accessory is required to see and hear system alerts. Refer to the VIA Mobile360 M800 User Manual for detailed installation instructions.
If the QR code is not successfully scanned within the 60-second window, the VIA Mobile360 M800 system will play the audio notification “Registration Failed”. If this occurs, reboot the system
and start over.
12. Log back into the VIA Fleet Cloud Management Portal and go to “Management -> Vehicles”. Click the Fleet in the list and select the vehicle which was registered. There
will be three new sections of vehicle information added to the vehicle information page.