BIOS
Page 4-8
AGP & P2P Bridge Control
Scroll to AGP & P2P Bridge Control and press <Enter>. The following screen appears:
AGP Aperture Size (MB)
This item defines the size of the aperture if you use an AGP graphics adapter. It
refers to a section of the PCI memory address range used for graphics memory.
Options: 32MB, 64MB, 128MB, 256MB, 512 MB, 1GB.
AGP 2.0 Mode or AGP 3.0 Mode
This item allows you to select the AGP mode. Select 8X only if your AGP card
supported it.
Options: 4X, 2X, 1X.
AGP Driving Control
This item allows you to adjust the AGP driving force. Choose “Manual” to key in
a AGP Driving Value in the next selection. This field is recommended to set in
“
Auto
”
to avoid any error to your system.
Options: Auto, Manual.
AGP Fast Write
This item allows you to use Fast Write transfer for CPU write to graphics adapter’s
memory.
Options: Auto, Disabled.
AGP Master 1 WS Write / AGP Master 1 WS Read
When Enabled, Writes/Reads to the AGP (Accelerated Graphics Port) are executed
with one wait states.
Options: Enabled, Disabled.
AGP 3.0 Calibration cycle
This item allows you to select AGP 3.0 Calibration cycle function.
Options: Enabled, Disabled.
