Installation
Page 3-10
SPDIF1:
Sony/Philips Digital InterFace connector
This connector links digital audio between the
mainboard and your audio devices, such as CD
player, sampler or DAT recorder. It allows the
digital transmission of audio data in S/PDIF format.
1
5
2
6
VCC
NC
GND
SPDIF_IN
SPDIF_OUT
SATA1 / SATA2:
Serial ATA Connectors
These connectors enable you to connect Serial
ATA devices that conform to the Serial ATA
specification.
1
GND
A-
B-
B+
GND
A+
GND
SATA2
SATA1
CUSB2
CUSB3
CUSB2/CUSB3:
Four USB 2.0 ports
This mainboard includes 2 additional USB2.0 ports,
identified by two 10-pin connector.
If you wish to use the additional USB ports, install
the card-edge bracket to the system chassis then
insert its cables to this 10-pin connector.
CAUTION !
Please make sure the USB cable has the same pin assignment. A different pin assignment
may cause damage to the system. If you need the USB cable, please contact our retailer.
