VIA Technologies KM400 Page 45 User Manual Download

Page: 45 / 86

BIOS

Page 4-15

VIA Onchip PCI Device

Scroll to VIA Onchip PCI Device and press <Enter>. The following screen
appears:

VIA-3058 AC97 Audio

This item allows you to disable the chipset on-chip support for AC97 Audio.
Options: Auto, Disabled.

VIA-3043 Onchip LAN (Optional)

Enables the onboard LAN feature. The default is Enabled.
Options: Enabled, Disabled.

Onboard Lan Boot ROM (Optional)

Enable/disable the onboard LAN Boot ROM. The default is Disabled.
Options: Enabled, Disabled.

Onchip USB Controller

Enables the USB controller.
Options: Enabled, Disabled.

Onchip EHCI Controller

Enables the EHCI (USB2.0) controller.
Options: Enabled, Disabled.

USB Device Support

Enable/disable support for USB device.
Options: Enabled, Disabled.

USB Keyboard Support

Enable/disable support for USB keyboard.
Options: Enabled, Disabled.

Summary of Contents for KM400























































































Search results

Summary of Contents for KM400

Reviews:

Related manuals for KM400

Brands by name

Popular brands

VIA Technologies KM400, User Manual

Search results

Summary of Contents for KM400

Reviews:

Related manuals for KM400

Brands by name

Popular brands