K7MKLE
System Board 52
Keyboard Typematic Rate and Delay Settings
If you set the
typematic rate setting
item to disabled, the system will use the defaults of 6
and 250 for the rate and delay items. If you set it to enabled you can select the values
yourself. Refer to the table below:
Values
Meaning
Typematic
Rate
6 ~ 30
This value sets the amount of time a character is repeated per
second if it is kept down on the keyboard. Choose from the
following values: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic
Delay
250 ~ 1000 This value sets the amount of time in ms before a character
starts repeating after it was pressed on the keyboard. Choose
from 250, 500, 750 and 1000 ms.
Security Option
The security option item allows you to select when the password needs to be entered. Refer
to the table below:
Values
Meaning
Setup
Password must be entered only when the user wants to enter the
BIOS setup.
Security
Option
System
The password must always be entered at boot.
OS Select for DRAM > 64MB
Values
Meaning
Non-OS2
If your OS is not OS2, always select this setting.
OS select for
DRAM >
64MB
OS2
Select this setting only if your OS is OS2
Shadow Options
The shadow options allow the BIOS to shadow (write to RAM) certain parts of the BIOS
code. This will speed up running the code, since running from RAM is much faster than
running from FLASH ROM
.
The individual memory ranges refer to BIOS code that may be present on expansion cards.
Normally you will not need to enable shadowing for these ranges. Refer to the table below
for details:
