BIOS Setup
3-7
IDE Primary Master/Slave
Press <Enter> to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The hard disk
will not work properly if you enter improper information for this category.
Select Auto whenever possible. If you select Manual, make sure the informa-
tion provided is from your hard disk vendor or system manufacturer.
IDE Primary Slave
The settings are None, Auto, Manual.
Access Mode
The settings are CHS, LBA, Large, Auto.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Precomp
Write precompensation.
Landing Zone
Cylinder location of the landing zone.
Sector
Number of sectors.
PIO Mode
The settings are Mode 0/1/2/3/4, Auto.
Ultra DMA Mode
The settings are Disabled and Auto.
