VIA Technologies EPIA-NX, User Manual

Page: 57 / 78

BIOS Setup
45
USB D
EVICE
S
ETTING
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
Item Help
USB Device Setting
Phoenix - AwardBIOS CMOS Setup Utility
USB 1.0 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Operation Mode [High Speed]
USB Keyboard Function [Enabled]
USB Storage Function [Enabled]
*** USB Mass Storage Device Boot Setting ***
UFDDA
USB Floppy
USB Floppy
UFDDB
No Device [Auto mode]
[Auto mode]
No Device
No Device [Auto mode]
No Device [Auto mode]
[Auto mode] No Device
No Device [Auto mode]
[Auto mode] No Device
No Device [Auto mode]
[Enable] or [Disable]
Universal Host
Controller
Interface for Universal
Serial Bus
USB 1.0 Controller
Enable or disable Universal Host Controller Interface for Universal Serial Bus.
Settings: [Enabled, Disabled]
USB 2.0 Controller
Enable or disable Enhanced Host Controller Interface for Universal Serial Bus.
Settings: [Enabled, Disabled]
USB Operation Mode
Auto decide USB device operation mode.
Setting Description
High Speed If USB device was high speed device, then it operated on high
speed mode. If USB device was full/low speed device, then it
operated on full/low speed mode.
Full/Low Speed All of USB Device operated on full/low speed mode