VIA Technologies EPIA Mini-ITX Mainboard User Manual Download Page 76

Page: 76 / 108

Chapter 4

4-10

4in1 chipset driver installation for Windows ME

1. Insert the supplied CD into the CD-ROM drive.
2. The CD should run automatically and the setup screen will appear. If
not, please run the “setup.exe” within the CD manually.
3. On the setup screen click on the

Install VIA Chipset Drivers

option

to install the

VIA Service Pack 4

4. When the installation starts, click

Next

to view the

VIA Service

Pack README

5. Click

Yes

to proceed.

6. The screen now will show two installation options. Select

Normally

Install

to manually install every driver, else select

Quickly Install

install the drivers automatically. Click

Next

to continue, for

Quickly

Install

users please go to step 11.

7. The screen now should show three drivers:

VIA ATAPI Vendor Support Driver

AGP VxD Driver

VIA INF Driver

Please select all three drivers and click

Next

to continue.

8. Select

Install VIA ATAPI Vendor Support Driver

and click

Next

continue.

Summary of Contents for EPIA Mini-ITX Mainboard













































































































Search results

Summary of Contents for EPIA Mini-ITX Mainboard

Reviews:

Related manuals for EPIA Mini-ITX Mainboard

Brands by name

Popular brands

VIA Technologies EPIA Mini-ITX Mainboard, User Manual

Search results

Summary of Contents for EPIA Mini-ITX Mainboard

Reviews:

Related manuals for EPIA Mini-ITX Mainboard

Brands by name

Popular brands