VIA Technologies epia-m860, User Manual, Page: 42 / 103

EPIA EPIA EPIA EPIA- -- -M860 M860 M860 M860 User Manual User Manual User Manual User Manual
30
3.2. SATA DOM Power Select Jumper
The SATA connectors (see page 22) can be used to support Disk-on-Module
flash drives. When the jumpers are set, +5V will be delivered to the 7
th
pin of
the SATA connectors. The jumper settings are shown below.
Figure Figure Figure Figure 29 29 29 29: SATA : SATA : SATA : SATA DOM voltage select jumper DOM voltage select jumper DOM voltage select jumper DOM voltage select jumper
SATA1 Setting SATA1 Setting SATA1 Setting SATA1 Setting Pin 1 Pin 1 Pin 1 Pin 1 Pin 3 Pin 3 Pin 3 Pin 3 Pin 5 Pin 5 Pin 5 Pin 5
DOM support On On Off
Regular (default) Off On On
SATA2 Setting SATA2 Setting SATA2 Setting SATA2 Setting Pin 2 Pin 2 Pin 2 Pin 2 Pin 4 Pin 4 Pin 4 Pin 4 Pin 6 Pin 6 Pin 6 Pin 6
DOM support On On Off
Regular (default) Off On On
Table
Table Table
Table 23
23 23
23: SATA DOM voltage sel
: SATA DOM voltage sel : SATA DOM voltage sel
: SATA DOM voltage select jumper settings
ect jumper settings ect jumper settings
ect jumper settings