VIA Technologies EPIA-M720, User Manual

Page: 51 / 103

EPIA EPIA EPIA EPIA- -- -M720 M720 M720 M720 User Manual User Manual User Manual User Manual
38
3.3. SATA DOM Voltage Select Jumper
The SATA2 connector (see page 22) can be used to support Disk-on-Module
(DOM) flash drive. When the jumper is set, +5V will be delivered to the 7
th
pin of the SATA2 connector. The pin jumper is labeled as “J2”. The jumper
settings are shown below.
1
5
2
6
Figure Figure Figure Figure 32 32 32 32: : : : SATA DOM voltage select jumper SATA DOM voltage select jumper SATA DOM voltage select jumper SATA DOM voltage select jumper
SATA2 Setting SATA2 Setting SATA2 Setting SATA2 Setting Pin 2 Pin 2 Pin 2 Pin 2 Pin 4 Pin 4 Pin 4 Pin 4 Pin 6 Pin 6 Pin 6 Pin 6
DOM support On On Off
Regular (default) Off On On
Table Table Table Table 28 28 28 28: : : : SATA DOM voltage select jumper settings SATA DOM voltage select jumper settings SATA DOM voltage select jumper settings SATA DOM voltage select jumper settings
Note:
Note: Note:
Note:
The default settings of “SATA DOM Voltage Select Jumper”: short pin 3&5 and pin 4&6