VHT Amplification THE STANDARD 18, User Manual

Page: 6 / 12

CH 2 (Channel 2):
5. Bass: Adjusts the low frequency level. Turn this knob clockwise to boost the bass sound, counter clockwise to cut the bass sound accordingly.
Center position (straight up) provides no cut or boost.
6. Mid: Adjusts the middle frequency level. Turn this knob clockwise to boost the middle sound, counter clockwise to cut the middle sound
accordingly. Center position (straight up) provides no cut or boost.
7. Treble : Adjusts the high frequency level. Turn this knob clockwise to boost the treble sound, counter clockwise to cut the treble sound accordingly.
Center position (straight up) provides no cut or boost.
8. Input: Used to connect the signal output from an electric guitar. (Use a shielded cable with 1/4” mono plug.)
9. Gain: Adjusts the distortion level and contributes to overall amplifier loudness of Channel 2
CH 1 (Channel 1):
10. Tone: Adjusts the tone characteristics of Channel 1
11. Gain: Adjusts the distortion level and contributes to overall amplifier loudness of Channel 1
12. Lo: Connect the cable from the instrument ’ s output jack to this jack. This jack is provided for instruments that have extremely high outputs
(i.e., active pickups) that can result in distortion when connected to the HIGH INPUT JACK. Always use an undamaged, shielded instrument
cable.
13. Hi: Connect the cable from the instrument ’ s output jack to this jack if it has an average output (i.e., Strat-Style and Les Paul-Style guitars).
Always use an undamaged, shielded instrument cable.
6