AC1870 iCast Quick Guide
61
cleared, not cumulative. That is, when the first trigger, after 5S and then trigger, is to
re-count. Note: DVI channel to select the network interface, you need to select the
continuous transmission mode (switch the signal after leaving the computer screen to
return to the previous channel screen), if you select the single send mode, will remain in
the computer screen.
4
、
Status Policy Description:
①
status strategy SDI and DVI interface, the interface number settings and action
strategy the same.
②
SDI behind the command code and tracking host should correspond to the alarm
signal start code and the end of the code, start tracking and stop tracking command code,
need to correspond
③
teacher close-up channel alarm corresponding to the scene is the teacher took to the
podium, the alarm end of the corresponding scene is the teacher down the podium;
students close-up channel alarm corresponding to the scene is the students up, the end of
the corresponding scene is the students sit down.
④
recording broadcast host to receive the start and end code will automatically query
[switch strategy] menu in the policy table, according to the policy table set the switching
effects, switching screen to switch.
Summary of Contents for iCast AC8170
Page 1: ...AC1870 iCast Quick Guide 1 AC8170 iCast User Manual Version V1 0 Release 2017 7 Content...
Page 8: ...AC1870 iCast Quick Guide 8 2 Application Figure 1 Topology Figure 2 Classroom Application...
Page 9: ...AC1870 iCast Quick Guide 9 3 Exterior Feature 1 2 Size 3 Connection...
Page 15: ...AC1870 iCast Quick Guide 1 5 Figure 9 functional tree...
