Dexx-vd_isl Quick Start Guide
VideoGamePerfection.com
Orient your DE10 Nano board so that the Ethernet connector is at the front, and the HDMI and
power connectors are at the back. Leave the video and power connectors disconnected for now.
Note the pin sockets highlighted in yellow, we will need those later.
Carefully place the connector from the DExx on to the connector on the right of the DE10 Nano
board, as highlighted in red in the picture above, with the SCART socket on the DExx pointing to
the back. Check the alignment of the pins before gently pushing the board down into place. The
connector on the DExx matches the connector on the DE10 Nano exactly, one pin for every hole,
Page 8
