v07/2020
7
2. USER’S MANUAL FOR OPERATION
2.1 Deployment
1
.
Before use, check all parts of the vehicle, especially the propellers, the cable, and the dome. Clean it, if it is
necessary. Check propeller rotation by finger.
2.
Plug the 3-pin plug of the connector to the reel, power and video cables to the monitor.
If you use the built-in monitor, it’s necessary to weaken a clamp before connecting!
Also the AC power cable (if you work from 100-230VAC).
Do not rotate thrusters on air!
Do not switch lights on a full power on air!
Be very careful with cable, do not:
- stand on it;
- press it;
- twist it.
Voltage on the cable is 180VDC! In case of any damage, you must repair or
change the cable.
IF THE LASER IS INSTALLED, MIND YOUR SAFETY. NEVER LOOK INTO
THE LASER LIGHT SOURCE.
Summary of Contents for GNOM STANDARD
