VFTech GNOM STANDARD, Operator'S Manual

Page: 12 / 42

v07/2020
12
2.USER’S MANUAL FOR OPERATION
#
Press
④
to select SCREEN MODES :
Mode1
,
Mode2,
or
Mode3
(see below)
#
You can choose the menu language (Russian/English)
2.4 Finishing the operation
To finish the operation, switch the
power OFF,
then disconnect
cables and wind them up into the reel.
Try to avoid nods and twisting of the cable.
After operation,
clean the propellers and motor shafts, and wash
the vehicle in fresh water.
Sleep mode (Power Saving Mode)
In order to save power and extend the battery life, the wireless joystick has the power
saving system. The joystick enters the sleep mode (power saving mode) under the following
conditions:
A. There is no operation within 30 seconds from establishing the connection between the
controller and the receiver.
B.There is no operation for 5 minutes.
To wake from the sleep mode, press one of the following keys:
ANALOG HOME MODE