Vezco VZ-TVI-5MP360R User Manual Download Page 2

User Manual 

Thank you for purchasing our product. If there are any questions, 
or requests, please do not hesitate to contact the dealer. 
This manual applies to the HD Fisheye Camera. 
This manual may contain several technical incorrect places or 
printing errors, and the content is subject to change without 
notice. The updates will be added to the new version of this 
manual. We will readily improve or update the products or 
procedures described in the manual. 

Privacy Notice 

Surveillance laws vary by jurisdiction. Check all relevant laws in 
your jurisdiction before using all this product for surveillance 
purpose to ensure that your use of this product conforms. 

 

Regulatory Information 

FCC Information 

FCC compliance: 

This equipment has been tested and found to 

comply with the limits for a digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, 
may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to 
correct the interference at his own expense. 

FCC Conditions 

This device complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions: 

1.

 

This device may not cause harmful interference. 

Summary of Contents for VZ-TVI-5MP360R





















Reviews: