27
TB0032
- Dual Beam 9/19° Puck Transducer. For Mounting on a
Electric Trolling Motor, In-Hull Mounting, Portable Use, or Ice Fishing.
Comes with 25 Feet of Cable. Built-In Switch Box must be Mounted
within 3 Feet of the Depth Finder.
BK0027
- Optional Suction Cup Mount for TB0027 and TB0032.
TB0050
- 19° Ice-Ducer. Self Leveling and Floats in
the Ice Hole. Comes with Float, Stopper, and 7 Feet
of Specially Designed Cable.
TB0051
- 9° Ice-Ducer. Self Leveling and Floats in
the Ice Hole. Comes with Float, Stopper, and 7 Feet
of Specially Designed Cable.
TB0052
- Dual Beam 9/19° Ice-Ducer. Self Leveling and Floats in the
Ice Hole. Comes with Float, Stopper, and 7 Feet of Specially Designed
Cable. Built-In Switch Box must be Mounted within 3 Feet of the
Depth Finder.
"S" CABLE
- The S-Cable (short for Suppression Cable) is used to
reduce the output power of the FL-8 or FL-8SLT. This can often help
clear up readings in shallow or cluttered waters. Simple installation
between the unit and transducer.
SB-100 Switch Box
- The SB-100 Switch Box allows you to run two
transducers on one FL-8 or FL-8SLT unit. You could switch between a
trolling motor mounted transducer and a stern mounted one or, while
ice fishing, switch between the hole you are fishing from and a remote
hole. Also, the
SB-200
is available as a switch box for two units and
one transducer.
