manualshive.com logo in svg

VEXILAR FL-8SLT, Operation Manual, Page: 26 / 28

Share
Download
VEXILAR FL-8SLT Operation Manual Download Page 26

26

Transducers and Accessories

TB0044 

- 19° Transom Mount High Speed

Transducer.  Comes with the Mounting Bracket
and 25 Feet of Cable.

TK144 

- Complete Mounting Kit. Comes with

TB0044 Transducer, FL-8 Power Cord, Unit Mounting Bracket, and all
the Hardware You Need to do the Job Right.

TB0030 

- 9° Transom Mount High Speed Transducer. Comes with the

Mounting Bracket and 25 Feet of Cable.

TB0045 

- Dual Beam 9/19° Transom Mount High Speed Transducer.

Comes with the Mounting Bracket and 25 Feet of Cable.  Built-In
Switch Box must be Mounted within 3 Feet of the Depth Finder.

BK0044 

- Optional Suction Cup Mount for all of the above High Speed

Transducers.  Dual suction cups for extra holding power.

TB0023 

- 19° Puck Transducer. For Mounting on a

Electric Trolling Motor, In-Hull Mounting,
Portable Use, or Ice Fishing.  Comes with 12 Feet
of Cable.

TK123 

- Complete Mounting Kit. Comes with

TB0023 Transducer, FL-8 Power Cord, Unit Mounting Bracket, and all
the Hardware You Need to do the Job Right.

BK0023 

- Optional Suction Cup Mount for TB0023.

TB0027 

- 9° Puck Transducer. For Mounting on a Electric Trolling

Motor, In-Hull Mounting, Portable Use, or Ice Fishing. Comes with 25
Feet of Cable.

Summary of Contents for FL-8SLT





























Reviews:

No comments