18
B_ALARM
B_ALARM controls the Bottom Alarm feature. To select
whether this feature is ON or OFF, highlight the item and
press the MODE button on the control panel. When this
item is ON and highlighted, you can press the
(4)
button or the
(3) to increase or decrease the minimum
depth at which the alarm will sound. The bottom alarm
makes a series of long beeps.
TEMP_ADJ
TEMP_ADJ is used to calibrate the optional
temperature sensor. Normally, this setting does not need
to be changed, but it allows for adjustment if necessary.
D_UNIT
D_UNIT is used to switch the depth unit between Feet
and Meters.
RESET
Use this feature to trouble shoot problems or to get back
to a "known state”. Highlight the RESET item and then
press the MODE button to reset all items to the initial
factory settings.
