42
6 Maintenance
Draining of water from the water separator/fuel filter
Every 100 operating hours.
9 Empty water separator
10 Bleeding
11 Start the engine
Empty the separately installed water separa-
tor/ fuel filter:
• Open the drain plug at the lower side of
the filter.
• Drain the water and close the drain plug.
Note: The water separator is not within the
scope of supply but installation is required!
After the water separator/fuel filter has been
drained, the air has to be bled from the fuel
system
The fuel system is self-bleeding.
Turn the key in the ignition lock to ‘ON’ and
leave the key in this position for 30 seconds.
The fuel pump will now bleed the system.
• Operate the starter switch until the engine
fires; release the starter switch if the engine
does not fire within 20 seconds.
• Wait until the starter motor has stopped
before making a new attempt to start the
engine.
• Repeat the above if the engine cuts out af-
ter a short time.
