4
Maintenance
NOTICE!
Maintenance intervals
Always include an inspection of the Smart
Supply
as part of maintenance
procedures for the Smart
Fork
®
Scale.
4.1
Daily visual inspection by the driver
Personnel:
n
Driver of industrial trucks
Protective equipment:
n
Protective clothing
n
Industrial safety helmet
n
Protective gloves
n
Safety shoes
1.
Check the Smart
Supply
at the fork head for tight fit.
2.
Check that the cable connection to the sensor system is secure.
3.
Check the surfaces of the battery for breakage and dirt.
4.
Check that the battery is fully charged
Further information on page 17
.
Replacing the battery at the end of the shift
In order to ensure speedy and problem-free use of the SmartSupply,
always make sure that there are fully charged batteries available for sub-
sequent use.
Insert the battery into the charging station right at the end of the shift.
Maintenance
Daily visual inspection by the driver
SmartFork
®
SmartSupply
20
EN
Summary of Contents for SmartFork SmartSupply SF-SUPPLY-V10-00X
Page 2: ...SmartFork SmartSupply 2 EN ...
Page 27: ......
