manualshive.com logo in svg

Vetter SmartFork SmartSupply SF-SUPPLY-V10-00X, Operating Instructions Manual

Share
Download
Vetter SmartFork SmartSupply SF-SUPPLY-V10-00X Operating Instructions Manual Download Page 3

This operating instruction (hereinafter referred to as “manual”) contains fundamental

safety instructions for handling the VETTER Smart

Supply

 (hereinafter also referred to as

"Smart

Supply

"). Incorrect use of the Smart

Supply

 can lead to serious injuries and mate-

rial damage as a result of fires, for example. For this reason, this manual and especially

the safety instructions/information contained therein must be read by the competent

industrial truck driver prior to assembly, commissioning and maintenance. The manual

must always be available at the operation site of the Smart

Supply

 (on the industrial

truck).

Illustrations in this manual are for basic understanding and may deviate from the actual

design.

Address

VETTER Industrie GmbH

Carl-Benz-Strasse 45

57299 Burbach

GERMANY

Phone

+49 2736 4961-964

E-Mail

[email protected]

Internet

www.smartfork.com

About this

manual

Customer

service

 Supplemental directives

EN

SmartFork

®

 SmartSupply

3

Summary of Contents for SmartFork SmartSupply SF-SUPPLY-V10-00X





























Reviews:

No comments

Brands by name

Popular brands

Load more brands