5
Operation
5.1
Telescoping the ManuTel
®
SlimLine
WARNING!
Insufficient lock!
If the lock for the slip-on coupling and basic fork arm is insufficient, this
can lead to loads being transported in an unsafe manner. There is a risk
of injury from the load slipping.
–
The lock must not be pressed in. The yellow marking must not be
visible when locked.
–
The locking pin must never protrude beyond the surface of the basic
fork arm.
–
The locking pin must always be completely countersunk in the basic
fork arm.
–
Working without a locked slip-on coupling is not permissible!
DANGER!
Risk of injury from shearing forces!
Considerable shearing forces can result from the unsecured movement of
the slip-on coupling on the basic fork arm. Fingers and body parts located
in the opening of the basic fork arm and slip-on coupling could be seri-
ously injured or even severed!
–
Never put fingers or body parts into the openings of the basic fork
arm and slip-on coupling.
–
Always secure the connection between the basic fork arm and slip-on
coupling with the locking pin intended to serve this purpose.
–
Only use the intended locking pin. Never use makeshift solutions
(e.g. screws).
–
Wear protective gloves.
Personnel:
n
Driver of industrial trucks
Protective equipment:
n
Protective work clothing
n
Industrial helmet
n
Protective gloves
n
Safety shoes
Operation
Telescoping the ManuTel® SlimLine
V1.09/2019
ManuTel
®
telescopic fork arm Type SlimLine
25
