Carry out disassembly of the Manu
Tel
®
G2 from the fork carriage in the following order:
1.
Align the Manu
Tel
®
G2 so that it is parallel with the ground.
2.
Lift the Manu
Tel
®
G2 up from the ground by raising the fork carriage a few centime-
tres until it is no longer in contact with the ground. Secure the fork carriage against
unintended lowering.
3.
Remove the locking screw.
Fig. 9: Opening the locking device
4.
Open the locking device of the Manu
Tel
®
G2 (put the lever of the locking device up
into a vertical position; Fig. 9).
Assembly and disassembly
Disassembly
V1.09/2019
ManuTel
®
telescopic fork arm Type G2
22
