Installation of the Hardware
Honda 750F
1
Objective
The Floating Mount Saddle
Bags are designed to fit a
large number of different
motorcycles. Each model
motorcycle has specially
designed mounting hardware.
When installed properly, the
hardware will locate the saddle
bags at the proper height and
fore and aft location on your
motorcycle. Use all of the
hardware specified and
periodically check for tight-
ness after installation.
Position the side loop
•
Start with either side and
position the side loop as shown.
Mount the side loop at
the grab bar mount
While holding the side loop in
place, slide the supplied 8mm x
90mm bolt through the side
loop mounting tab and into
the grab bar mount.
NOTE: A metric scale is
supplied on page 6 for your
ease in identifying different
fasteners.
7