ON/OFF
2
ON/OFF
ON/OFF
9
MAINTENANCE
A. Clean dirt of inspire window of control unit.
Control unit has lots dirt and dust around the fan if used for a long time which will affect function of
control unit, user can take off the fan lid to clean or wash, then dry it up and refix to the control unit.
B. Release water from control unit and mattress
If control unit is not used for a long time, there has dirt or deposit in the water tank, at this time
please release the water and fill with new water. Turning on the control unit and let water circulate in
mattress for couples of minutes, then release the water with the plastic key, after finish the release,
re-fill the tank with new water, then release again and again repeat twice or 3 times.
If mattress pad is not used for long time, please release the water in the mattress with the plastic
key .
Release water for
control unit
Release water
for mattress
CONTROL UNIT AND MATTRESS INSTALLATION INSTRUCTION
A. Machine appearance instruction
B. Installation step
water
tank
water
input
inspire
window
handle
power
wire
operation
board
pipe
connector
switch
heat release
window
pad
Mattress pad put on the right place as Fig under the cover.
Place control unit besides bed(on the floor)
Bed
Mattress pad
Pillow
Connect
terminal(female)
Tube
Connect
terminal(male)
Connect
terminal(male)
Connect
terminal(female)
