13
14
Head Unit
Detaching the Head Unit
Slide the Head Unit into the Mounting
Bracket as shown until it clicks into
position.
Locking Tab
Press
Slide out the Head Unit by pressing the
Locking Tab simultaneously
INSTALLATION TESTS
To test the Speed Sensor installation
Pick up the front of the bicycle and spin the front
wheel. The LCD should display a speed reading
within 2-3 seconds.
If there is no speed reading, check the alignment and
spacing between the magnet and sensor. Make sure
that the Head Unit is completely locked into position.
If the problem has not been fixed, go to
http://www.vetta.com/support/support.asp or talk to
an authorized Vetta Retailer for additional support.
Once the sensor is aligned, tighten the magnet
locking screw and bike mount strap.
