PROGRAMMING YOUR WHEEL SIZE
STEP 1
Once you select
miles ( )
or
kilometers ( )
and press the lower key
(A), the C-500 will automatically advance into the wheel size setting mode. (See
SETTING MILES/HOUR OR KILOMETERS/HOUR)
STEP 2
The right hand digit (4) will begin flashing. Use the upper key (B) to advance to the
number that you want.
NOTE:
Hold the upper key (B) to fast advance through the digits.
STEP 3
Press the lower key (A) to set the number and advance to the next flashing digit (7).
STEP 4
Repeat this sequence until all digits are at the appropriate settings.
STEP 5
Press the lower key (A) one final time to enter the wheel size setting into memory
and advance the unit back to the
/
screen.
The Vetta C-500 cycle computer is equipped with a digital clock that displays time
in a 12 hour format.
STEP 1
With the display in the mode, press the lower key (A) for 2 seconds.
STEP 2
The screen will clear and the hour digits will begin to flash. Advance the digits
using the upper key (B).
NOTE:
Hold this key to fast advance through the digits.
STEP 3
When you have selected the correct digit, press the lower key (A) to enter the digit
and advance to set the minutes using the same procedure as above.
STEP 4
Press the lower key (A) to set the minutes and return to the screen.
SETTING THE CLOCK