PROGRAMMING YOUR WHEEL SIZE
STEP 1
Once you select
miles ( )
or
kilometers ( )
and press the “B” key, the
C-25 will automatically advance into the wheel size setting mode.
STEP 2
The right hand digit (4) will begin flashing. Use the “C” key to advance to the
number that you want.
NOTE:
Hold the “C” key to fast advance through the digits.
STEP 3
Press the “B” key to set the number and advance to the next flashing digit (7).
STEP 4
Repeat this sequence until all digits are at the appropriate settings.
STEP 5
Press the “B” key one final time to enter the wheel size setting into memory and
advance the unit to the resettable odometer mode.
This sequence needs to be performed for each of the two bike memories in the C-25.
Once you have completed the programming of the wheel size setting of the unit,
you will enter the programming sequence for the programmable odometer. On a
new computer this screen should read 00000. If you do not want to program the
odometer simply press the “A” key to exit the programming sequence and return
to the screen.
If you are replacing a battery and wish to retain your mileage in the computer,
follow these steps:
STEP 1
When the unit enters the programming sequence for the odometer, the right digit
(0) will begin flashing.
STEP 2
Advance the digit using the “C” key until you get to the desired number (Hold for
fast advance).
PROGRAMMING THE RESETTABLE ODOMETER
