PROGRAMMING YOUR WHEEL SIZE
Once you select
miles (
m/h
)
or
kilometers (
km/h
)
and press the key, the C-06
will automatically advance into the wheel size setting mode. (See SETTING
MILES/HOUR OR KILOMETERS/HOUR)
The
Default Wheel Size Setting of 2124mm (700 x 25c)
will appear on the screen
for 4 seconds. To select this setting, simply press the key within the 4 seconds
and the screen will return to the speedometer mode. You are now ready to install
the C-06 on your bike.
If you desire a wheel size setting other than the default, wait 4 seconds and the
last digit of the wheel size setting will begin to flash and automatically advance
through the numbers (4,5,6,7...). When the correct number appears, press the
key to enter that number and advance to the next digit.
Repeat this procedure for all 4 digits and the screen will return to the speedometer mode.
The Vetta C-06 cycle computer is equipped with a digital clock that displays time
in either 12 or 24 hour formats.
STEP 1
Press the key until you get into the clock mode, indicated by the clock icon
( )
in
the lower left corner and the colon
(:)
separating the four digits.
STEP 2
Press and hold the key for two seconds. The display will begin to flash between
the 12 and 24 hour formats. Press the key when the format that you desire is visible.
STEP 3
The hour digits will now begin to flash and advance automatically. When the
number that you want appears, press the key to set and advance to the minutes.
STEP 4
Set the minutes in the same way as the hours, and the unit will return to normal
operation when you press the key.
SETTING THE CLOCK
